新闻中心
Pearl cotton, also known as EPE, is a foamed polyethylene polymer. Pearl cotton has many advantages such as water and moisture resistance, shock resistance, sound insulation, thermal insulation, good plasticity, strong toughness, recycling, environmental protection, strong impact resistance, and good chemical resistance.

Features: low density, good flexibility, high recovery rate; Better shock resistance than polystyrene plastic; Independent bubble structure, low surface water absorption rate; Good penetration resistance; Acid, alkali, salt, oil and other organic solvents have excellent aging resistance; It does not flow at high temperatures and does not crack at low temperatures.
Application: High end furniture, household appliances, instruments and meters, craft gifts, wooden products, glass ceramics, building waterproofing, carpet interlayers, sound insulation, travel bags, precision parts, various pipeline insulation and other fields. What to pay attention to when using hot melt adhesive for bonding:
Usage steps:
1. Add hot melt adhesive particles to the melter.
2. Set the temperature of the glue machine and drum.
3. Apply pearl cotton glue onto the drum.
4. Press the pearl cotton to bond.
Precautions:
1、 Set the glue machine temperature and drum temperature correctly according to the technical parameters provided by the manufacturer.
2、 Please use hot melt adhesive particles produced by reputable manufacturers. (For example,Sunlife Hot Melt Adhesive)
3、 Pay attention to safety during the bonding process to avoid being burned by rollers and rubber.
If, like many manufacturers, hot melt adhesive on the packaging line may encounter problems, resulting in slower packaging speed, increased costs, and potential product damage or loss. Let’s take a look at the common hot melt adhesive problems that manufacturers face today and explore possible solutions. Problem 1: UsingHot melt adhesiveToo little If your packaging […]
How to obtain good performance of hot melt adhesive for books? Your primary task throughout the day is to ensure that everything in the factory runs smoothly and efficiently to achieve high output. Although it is only a small part of the entire process, it includes your hot melt operation. There are many factors that […]
The common problem is that the film cover cannot stick to the book cover After the surface of the hardcover book cover (waist cover/outer cover) is coated with film, the surface energy of the film layer is extremely low,hot melt adhesive pelletsDifficult to wet and penetrate, resulting in weak adhesion between the protective cover and […]
Pearl cotton hot melt adhesiveMany customers often encounter the phenomenon of weak adhesion when using a roller hot melt adhesive machine to glue pearl cotton. This is because the amount of glue is not enough, resulting in poor adhesion. However, increasing the amount of glue will cause waste and increase costs. So it is necessary […]