新闻中心
How to obtain good performance of hot melt adhesive for books? Your primary task throughout the day is to ensure that everything in the factory runs smoothly and efficiently to achieve high output. Although it is only a small part of the entire process, it includes your hot melt operation.
There are many factors that can affect the performance of hot melt adhesive, but understanding the good practices that each hot melt adhesive user should follow will increase your chances of achieving good results for your application.
Please follow the following 3 A tip to ensure that the hot melt adhesive for books performs well:
1. Apply glue at an appropriate temperature: Temperature is an extremely important variable for the success or failure of hot melt adhesive application in books. If the adhesive is too hot, it will take longer to bond and may lead to a good description of “gum failure” (learn more here). If the temperature of the adhesive is too low, it may solidify prematurely and cause weak bonding. This is called a preset. Follow the manufacturer’s TDS to obtain the recommended application temperature range and make corresponding adjustments.
2. Keep the glue can full: Remember to keep the glue can full during use. When the adhesive level is too low; Hot spots and gel formation may occur, leading to carbonization. If you manually load them, it’s easy to forget to refill the flowerpot. Having an automatic filling system to replenish adhesive as needed and a liquid level control system to monitor adhesive levels will ensure that your tank remains full. This can supplement the antioxidants in the adhesive to combat carbonization.
3. Reduce the pot temperature when not in operation: Due to the continuous thermal stress on the hot melt tank, hose, and nozzle, they have a tendency to produce coke. Reduce the pot temperature when not in use to minimize any potential thermal degradation of the hot melt adhesive and equipment. This will reduce the chance of carbonization occurring.
It’s not that difficult to change the glue for the glue installation machine in the graphic store Many graphic and text store owners are afraid of changinghot melt adhesive pellets——Afraid of blocking rubber hoses, afraid of temperature switching problems, and afraid of wasting glue. In fact, as long as you follow the steps, it can […]
It is well known that books are usually bonded with hot melt adhesive. In the book binding, < a href = "http://www.sunlife888.com" > hot melt adhesive books < / a > can be piles of paper and adhesive in the cover of the book. There are various methods to complete the binding of books and […]
EVA hot melt adhesive is a new type of adhesive developed to meet the requirements of being harmless, energy-saving, resource-saving, and environmentally friendly today. The characteristic of EVA hot melt adhesive is that it is 100% solid and does not contain water or other solvents, so there is no environmental pollution or residual solvent toxicity […]
Direct answer: Most of them are due to insufficient heat penetration, not poor glue The first few books and cardboard boxes couldn’t stick firmly when turned on, but then it became normal – this is almostHot melt adhesive granulesThe most common phenomenon in use. The root cause is usually that the temperature displayed on the […]
