新闻中心
More and more manufacturers are using EVA hot melt adhesive to process books and other materials, regardless of the size of the processing plant, there will still be an upward trend in the future. This is because using this adhesive has the advantages of fast book publishing, short cycle time, beautiful appearance of books, and saving manpower and material resources. However, some manufacturers often focus solely on producing more work and processing, while neglecting the applicability of EVA hot melt adhesive in terms of usage environment and conditions. As a result, many difficult to understand and comprehend issues arise during the processing. Understand. Here are some suggestions based on my own experience for reference by the unit.
Analysis of the causes of book block breakage
II.Analysis of the causes of bubble formation
ThreeBooksBackAnalysis of perforation reasons
IV.Analysis of Drawing Reasons
Fifth,Hot melt adhesive smokingCarbonizationCause analysis
There is no separate “drop standard” for sealed hot melt adhesive particles, and the industry is concerned about itWhole box drop test——If the sealed cardboard box is dropped according to the national standard/transportation standard and the glue seam does not open, it is qualified. The core reference is GB/T 4857.5 Drop test, as well as […]
Direct answer: A new sample must be made changeHot melt adhesive granulesSuppliers, even if they claim that the parameters are exactly the same and can be directly replaced, must still make new samples on their own equipment and actual substrates. The reason is that two adhesives with the same nominal softening point of 85 ℃ […]
hot melt adhesive pelletsAre you afraid of ultraviolet rays? Hot melt adhesive particles are based on high molecular weight materials such as EVA, PO, PA, etc. These materials undergo photo oxidative degradation under long-term UV irradiation – molecular chain breakage, decreased cross-linking degree, resulting in yellowing and brittleness of the adhesive layer, and decreased bonding […]
EVA eco-friendly hot melt adhesive is a thermoplastic material composed of EVA, tackifiers such as petroleum and rosin, as well as some bonding AIDS, and is formed in solid cylindrical rods or granular form. It can be melted and applied by using a hot melt gun, sprayer or other glue binding equipment, etc. Because it […]