新闻中心
A factory that produces cultural and creative calendars focuses on rushing goods in the fourth quarter of each year. Originally, the main line was dried with cold glue,Hot melt adhesive granulesAfter being put into operation, the speed should have been increased, but the yield rate in the first month was only 82%. There were occurrences of page flipping and glue opening at the iron ring, which crushed the production capacity due to rework.

Technicians from Guangzhou Sunlife Trading went to the factory to make samples, using high initial adhesion and high penetration EVA granules specifically for books and magazines. They also adjusted the parameters of the adhesive assembly line to: deepen the milling back by 0.5mm, increase the adhesive amount to 0.6 g/book, and press and hold for 3 seconds. Sunlife hot melt adhesive provides trial adhesive reports for different paper weights simultaneously, helping the production line directly compare and select.
| indicator | Before renovation | after renovation |
|---|---|---|
| Binding yield | 82% | 97% |
| Single book rhythm | 12 seconds | 8 seconds |
| Rework rate | high | Approaching 0 |
The rush season not only delivers on schedule, but also frees up production to accept additional orders.
Q1: Do iron circle calendars also need to use hot melt adhesive?
The iron ring is responsible for the loose leaf, while the spine of the book is still secured to the inner pages and cover with hot melt adhesive.
Q2: Is it necessary to use adhesive for thick paper?
The combination of glue type, milling back, and glue amount is insufficient for single glue replacement.
Customer pain point: The bottom of the paper bag always has adhesive peeling A gift paper bag processing workshop in Guangzhou can produce 2000 handmade paper bags per day, using white milk adhesive at the bottom. The humidity in the southern region is high, causing slow curing and low initial adhesion of white latex. Even […]
Direct answer: The real reason for the intermittent sealing line on this sealing line is the bridging of the feeding port of the melt glue pot, which causes the liquid level to intermittently decrease, and the carbonization residue inside the nozzle is partially blocked. After cleaning the pot and changing the material+adjusting the feeding method, […]
Recently, Secretary Guo of the Shishan Town Committee of Nanhai District and his team, accompanied by the community’s responsible person, conducted an on-site inspection of Foshan Jucai New Materials Co., LTD. This inspection aims to gain a thorough understanding of the production and operation status of enterprises and promote the upgrading and innovative development of […]