新闻中心
Legitimate hot melt adhesive particles themselves are thermoplastic polymers that are solid, non-volatile, and insoluble in water at room temperature, making them relatively safe adhesive materials. Whether it is “toxic” mainly depends on the formula and high-temperature usage method.
| focus | Explanation |
|---|---|
| recyclability | Pure EVA hot melt adhesive belongs to thermoplastic and can theoretically undergo further hot melt treatment |
| Residual odor | After cooling, the odor is sealed, and there is almost no sensation when it comes to books/boxes |
| Inspection Report | Choose a manufacturer that can provide RoHS and VOC data |
Q: Can hot melt adhesive particles come into contact with food packaging?
Answer: It is necessary to choose a food grade formula and provide contact safety testing. Sunlife hot melt adhesive can provide corresponding reports according to its use.
Q: Does having a smell equate to being toxic?
Answer: Not necessarily, but a pungent smell usually means there are more volatile substances. It is recommended to replace it with qualified materials.
Q: How can the workshop reduce risks?
Answer: Temperature control should not exceed the upper limit, ventilation should be maintained, and low odor new material particles should be selected.
Sunlife hot melt adhesive from Guangzhou Sunlife Trading can provide environmental and food contact testing reports, making procurement more reassuring.
For binding books and periodicalsHot melt adhesive granulesWhat model? Book and magazine adhesive packaging is not a universal use of particles. It is important to choose the appropriate model based on the paper type, thickness, and machine type. Below is a list of common models. List of adhesive models for books and periodicals General EVA […]
Conclusion first:For printing factories with monthly usage of less than 2 tons and multiple machines for dispersed use, 25kg bags are more cost-effective; Packaging factories with stable monthly usage exceeding 3 tons and centralized feeding conditions have lower unit prices and more labor-saving for ton bags (500-1000kg bags).The price difference between the two is usually […]
Hot melt adhesive particles are a type of plastic adhesive product. Their physical state changes with temperature within a certain temperature range, while their chemical properties remain unchanged. Hot melt adhesive particles are non-toxic and odorless, making them an environmentally friendly adhesive product variety.Hot melt adhesive particles。 It is very popular among enthusiasts for making […]
Direct answer: It is recommended to choose multi-layer paper bags with high initial adhesion, medium to short opening time, and good folding resistance for sealingHot melt adhesive granulesThe softening point is above 90 ℃, commonly known as EVA high viscosity or APAO type. The difficulty of multi-layer paper bags lies in the multiple layers of […]
