新闻中心
The packaging hot melt adhesive is heated to become liquid. Apply the liquid to the initial surface by extruding, spraying, or rolling the specified amount, and then expose it to a brief “open time” to achieve optimal temperature and “humidity” for bonding to the initial surface. After the designated opening time, the two surfaces come into contact with each other. At this point, the adhesive penetrates the second surface and cools, returning to a stable solid state and bonding the two together. In some cases, compression may be necessary to promote optimal adhesion.
Maintaining appropriate application temperature and opening time is particularly important for strong hot melt bonding. Some ideal temperature guidelines for common industrial applications are:
Graphic Art Hot Melt Adhesive – Typically, graphic art adhesives are applied at 350 degrees Celsius, have variable opening times, and remain effective between 20 and 120 degrees Fahrenheit.
Suitable for packaging hot melt adhesive substrates
Compared to other types of adhesives, hot melt adhesives are an ideal choice for several different materials or substrates due to their ease of application, flexibility, and relatively low melting temperature. Most hot melt adhesives can be safely used for the following substrates:
However, although hot melt adhesive materials are safe for these substrates, it is necessary to choose the correct heating device in order to apply it at a safe temperature. Numerous low-temperature glue guns can apply hot melt glue to finer materials, while more durable substrates can withstand hot melt temperatures up to 400 degrees.
Industrial application of packaging hot melt adhesive
There are many types of hot melt adhesives, pressure-sensitive labels, and other hot melt formulas, and their potential applications are also diverse. Considering the above characteristics and temperature range, these are some of the main industries that benefit from using hot melt adhesives today:
What are the carbides in the glue pot? Why is it necessary to clean up? hot melt adhesive pelletsHeating in the glue pot for a long time will cause the resin and thickening agent to slowly decompose, forming black carbides that deposit on the bottom of the pot and the wall of the rubber tube. […]
Adhesive failure Adhesive joints exhibit incomplete continuity in construction, which often makes them the focus of stress concentration. Under the combined action of external forces and environmental stress, joints are prone to damage. The failure strength of a joint, which refers to the maximum load that a unit of bonding area or length can withstand, […]
EVA hot melt adhesive is currently one of the widely used industrial adhesives. They are essentially thermoplastic based on polymers, which means they are solid at room temperature but liquefy when exposed to a heat source. In this article, you will learn more about hot melt adhesive: EVA hot melt adhesive. What issues should be […]
Direct answer: One kilogram of hot melt adhesive granules specifically designed for books and periodicals, estimated to be able to hold approximately 80-120 books in a common A4 booklet (about 150 pages, with a book back length of about 29.7 centimeters); There are more pocket books and thin books, up to 150 or more; Thick […]