新闻中心
Can EVA hot melt adhesive be reused? Hot melt adhesive is widely used in industries such as electronic components, metals, wood, toys, furniture, handicrafts, paper products, textiles, packaging, etc., all of which require hot melt adhesive.

Someone asked before: Can EVA hot melt adhesive be reused? If it can be reused repeatedly, isn’t the economic utility particularly good?
In fact, theoretically, hot melt adhesive can be used one or two more times. However, if used too many times in actual environments, it will definitely affect the effectiveness of hot melt adhesive.
EVA hot melt adhesive generally needs to be heated and melted before use. However, excessive heating can cause the molecular structure of the hot melt adhesive to become unstable, leading to aging and affecting the performance of the hot melt adhesive itself. Therefore, there is an uncertain impact on the bonding effect of hot melt adhesive. Generally speaking, the more heating cycles, the more unstable the hot melt adhesive becomes. Heating can cause molecules to become overly active. There are usually two consequences. 1. The performance of hot melt adhesive is weakened. The second is the appearance of carbides. If the performance continues to weaken and reaches the critical point of carbides, carbides will appear.
Therefore, if it is a material with particularly high requirements for adhesive effect, for safety reasons, it is still necessary to avoid using aging adhesive.
First, give the conclusion:Hot melt adhesive granulesForming through four steps of “heating coating pressing cooling” Hot melt adhesive particles are solid particles at room temperature and cannot directly adhere to objects. It needs to be heated to 160-190 ℃ using a glue pot or granule gluing machine to melt into a liquid state, applied to […]
How to seal boxes and cartons with packaging hot melt adhesive? Almost every adhesive application for boxes and cartons involves the use of hot melt adhesive to seal the flaps. Apply adhesive to one wing at an elevated temperature, and then place it in contact with the surface of the second wing. Then press them […]
Conclusion: Complianthot melt adhesiveParticles are basically non-toxic at room temperature, and the risks mainly lie in “high-temperature melting” and “ingestion” Conventional EVA and APAO based hot melt adhesive particles are 100% solid content, solvent-free bulk adhesives that are stable at room temperature, non-volatile, and safe for daily contact and storage. What really needs to be […]
Direct answer: EVA hot melt adhesive granules are used for book and magazine packaging, and the glue pot is generally set at 160-180 ℃; The packaging and sealing scenarios are mostly between 150-170 ℃; The recommended construction temperature provided by the rubber particle manufacturer shall prevail, and the fluctuation should not exceed 10 ℃. The […]