新闻中心
EVA hot melt adhesiveWhat are they made of and can they be recycled? The difference between biodegradable and bio based packaging follows a global trend where consumers want to produce and purchase more environmentally friendly products.
The awareness and recognition of more environmentally friendly and sustainable packaging materials (such as reusable, biodegradable, etc.) are growing, but for some people, evaluating the impact of adhesives on the sustainable development model of the industry is often confusing and difficult. It is a small yet important component of modern packaging.
Most EVA hot melt adhesive is typically made from a combination of polymers, resins, waxes, and functional additives, making it a thermoplastic. Thermoplastic is a substance that turns into plastic when heated and hardens when cooled, making it easy to recycle, but some eventually become microplastics in marine environments. This is one of the biggest challenges facing the adhesive industry.
EVA hot melt adhesive is an essential part of packaging manufacturing, and most modern recycling and waste management measures ensure that the glue in these materials does not enter the marine environment.
Most hot melt adhesives are not easy to recycle, but their compatibility with recycling is crucial – they must not affect the recycling ability of the bonded products. Some adhesives make this process more difficult, forming a substance commonly known as a “sticky substance” because they can soften and form gelatinous balls during the pulping process, but usually these do not attract much attention and are an acceptable part of the recycling process.
Unused hot melt adhesive can be recycled into similar products, although not always feasible, if the adhesive can be removed from its application surface, it can also be recycled into similar product types. When producinghot melt adhesiveAt that time, there was almost no material waste, and any unused adhesive usually needed to be reprocessed.
First, give the conclusion The pages of three-dimensional books and flipped books need to be repeatedly folded, and ordinary books and magazines have hard and brittle rubber particles that break when folded. To stick firmly, one must avoid the four misconceptions of “using ordinary glue, applying too thick, pressing too hard, and not trying to […]
Hot melt adhesive granulesIs there any odor? Is it big? Hot melt adhesive particles produced by legitimate manufacturers have a very low odor. Taking EVA based hot melt adhesive granules commonly used in book binding, packaging and sealing, and quick printing of graphics and text as an example, they are solid particles at room temperature […]
For EVA hot melt adhesive used for binding, it can be divided into high-speed adhesive and low-speed adhesive according to different curing times. The curing speed of high-speed adhesive is slightly faster, while the curing speed of low-speed adhesive is slightly slower. According to the material of the book, it is divided into laminated paper […]
Direct answer: One kilogram of hot melt adhesive granules specifically designed for books and periodicals, estimated to be able to hold approximately 80-120 books in a common A4 booklet (about 150 pages, with a book back length of about 29.7 centimeters); There are more pocket books and thin books, up to 150 or more; Thick […]
