新闻中心
When maintaining high-performance operation of the hot melt adhesive machine, you can take many measures to reduce downtime and improve system performance. Please remember that downtime equals production loss.
1) Apply hot melt adhesive at the correct temperature. Using the correct settings can avoid many troubles. You may also want to try using a metallocene hot melt that can melt very cleanly, reducing accumulation and carbonization.
2) Regularly flushing the hot melt system, including the hot melt hose, not only helps maintain the hot melt equipment, but also extends the service life of the hot melt hose and hot melt gun.
3) There is nothing worse than waiting for parts for a long time to prepare spare parts for the hot melt system. These spare parts include glue gun nozzles, glue gun heating modules, hoses, and air filters. This mainly depends on the frequency of use.
4) Make sure to keep the lid on the hot melt machine closed, as this will eliminate the entry of debris. We open the lid to facilitate frequent addition of hot melt adhesive, but the presence of foreign objects in the system may cause multiple problems, not only with the glue furnace, but also with hoses and glue guns or nozzles.
5) Ensure to minimize idle time as much as possible during work. Long term high temperature without using the machine can lead to scaling and carbonization of the hot melt adhesive machine.
What exactly is’ drawing ‘on the machine At the moment of glue coating or breaking, a thin wire is pulled out from the end of the sealing or gluing line, which is called “drawing” in the industry.Hot melt adhesive granulesAfter melting, it is a high viscosity hot fluid, and once the temperature, flow rate, and […]
The feasibility of reheating and reworking hot melt adhesive after solidification depends on the degree of degradation of the adhesive performance after the secondary heating. This article explains the typical changes of EVA hot melt adhesive after multiple heating, the key points of rework operation, and why PUR cannot be reworked.
What are the properties, costs, and functions of hot melt adhesive? Many different materials are used to produce different hot melt adhesives. The final performance of hot melt adhesive indicates that there are significant differences in the cost, performance, and functionality of the final product of hot melt adhesive. Tape and label hot melt adhesive […]
Kraft paper board book coverhot melt adhesive pelletsCan it stick? Many hardcover book and magazine factories are most concerned about weak adhesion and cracked book covers when making kraft paper covers. Hot melt adhesive particles, as the mainstream adhesive material for book binding, are fully capable of bonding kraft paper and cover paper. The key […]
