新闻中心
Bookbinding adhesive is a flexible and durable hot melt adhesive used in bookbinding. This combination creates a book that can withstand bending and folding without spine cracking or page pulling. Hot melt adhesive for books and periodicals is divided into book edge adhesive and book back adhesive according to their uses.
EVA hot melt adhesive
EVA hot melt adhesive has always been a key product for book binding applications. EVA hot melt adhesive has low cost and is easy to use after heating, making it a common choice in the book binding industry. EVA hot melt adhesive has a light yellow transparent appearance, oval shaped particles, non-toxic and environmentally friendly. Using ethylene and vinyl acetate as the main raw materials, with the addition of thickening resin. High heat resistance, high strength, low temperature resistance, good fluidity, thin and uniform coating, and can also be processed by subsequent spray painting.
In addition to book binding and side bag sealing applications, bookbinding adhesive can also be used to stick the edges of magazines, lists, hard album covers, etc. onto copperplate paper.
Hot melt adhesive can adhere to various types of paper, such as paper, recycled paper, and others, to meet the specific needs of each customer. It has higher adhesive strength, better quality, and greater durability.
In response to the need to increase production capacity, book binding adhesive has a fast drying time and can be used for both high-speed and low-speed production lines. There are many products suitable for each system, such as cardboard packaging and pearl cotton packaging. Hot melt adhesive has high bonding strength, long opening time, and the glue will not crack in cold weather. It can still maintain its hardness at high temperatures, keeping the book in a good bonding state.
Arriving at Sunlife Hot Melt Adhesive, customers are not only satisfied with the product quality, but also feel the enthusiastic, guaranteed, and reputable service.
What are the hot melt adhesives for filters? An air filter is a component used to purify the air. Filters are generally used in farms, laboratories, sterile rooms, car engines, car air conditioners, household air conditioners, household air purifiers, etc. 1、 Hot melt adhesive for flat filter The commonly used filter element is a high-efficiency […]
Can EVA hot melt adhesive be reused? Hot melt adhesive is widely used in industries such as electronic components, metals, wood, toys, furniture, handicrafts, paper products, textiles, packaging, etc., all of which require hot melt adhesive. Someone asked before: Can EVA hot melt adhesive be reused? If it can be reused repeatedly, isn’t the economic […]
Kraft paper board book coverhot melt adhesive pelletsCan it stick? Many hardcover book and magazine factories are most concerned about weak adhesion and cracked book covers when making kraft paper covers. Hot melt adhesive particles, as the mainstream adhesive material for book binding, are fully capable of bonding kraft paper and cover paper. The key […]
Both new and existing users of hot melt packaging adhesive need to consider many factors when solving problems on the production line. The problem usually occurs in one of the following three aspects: equipment, adhesive, or environment. Any one or combination of these three variables could be the root cause of the problem. Some common […]