新闻中心
Legitimate hot melt adhesive particles should come with a testing report when leaving the factory. Newcomers are often discouraged by a bunch of indicators, but in fact, by grasping a few key items, one can judge whether it is good or bad. Below is a comparison of the core indicators.
| indicator | What are you looking at? | Good material performance |
|---|---|---|
| softening point | Temperature resistance and seasonal stability | Consistent with the nominal value and with small batch differences |
| Melt viscosity | Flow and Coating | In the recommended range |
| volatile matter | Odor and Bubbles | The lower the better. |
| peel strength | Adhesive strength | Compliant and stable |
| RoHS/VOC | Environmental Safety | Compliance passed |
Q: Can I buy without a report?
Answer: It is not recommended for mass production. Sunlife hot melt adhesive provides testing data along with the goods.
Q: The higher the indicator, the more advanced it is?
Answer: Wrong, matching the production line is the best, blindly setting high targets can easily lead to glue overflow.
Q: How to verify the authenticity of the report?
Answer: To obtain a third-party report number, you can verify it with the institution.
Procurement requires a report, and Sunlife Hot Melt Adhesive from Guangzhou Sunlife Trading provides complete testing data.
What causes white spots and bubbles in the adhesive layer? Directly provide the order of investigation:Moisture absorption of adhesive particles → high temperature of adhesive glue → stirring and rolling into air → surface moisture of substrate → suction of adhesive pumpAccording to this order, over 90% of the white spot bubble problems can be […]
What are the benefits of using hot melt adhesive for packaging? When a business is just getting started, it needs a great deal of originality, courage and the ability to make full use of the things around it. When delivering products to customers, the issue of product packaging comes into play. However, once enterprises make […]
Direct answer: For activities such as annual report brochures that require “thick copperplate paper+laminated cover+flat spreading”, the selection of adhesive should focus on 8 parameters – initial adhesion, opening time, softening point, melt viscosity, flexibility, cold resistance, odor level, and color stability. Any non-compliance may expose problems after the delivery of the finished product. Why […]
The business trend of the printing industry this year is based on the observed data from the National Bureau of Statistics on large-scale enterprises (with an annual operating income of over 20 million yuan). There are nearly 7,000 large-scale enterprises in the printing industry. Compared with the 100,000 enterprises in the entire industry, their revenue […]
