新闻中心
How to obtain good performance of hot melt adhesive for books? Your primary task throughout the day is to ensure that everything in the factory runs smoothly and efficiently to achieve high output. Although it is only a small part of the entire process, it includes your hot melt operation.
There are many factors that can affect the performance of hot melt adhesive, but understanding the good practices that each hot melt adhesive user should follow will increase your chances of achieving good results for your application.
Please follow the following 3 A tip to ensure that the hot melt adhesive for books performs well:
1. Apply glue at an appropriate temperature: Temperature is an extremely important variable for the success or failure of hot melt adhesive application in books. If the adhesive is too hot, it will take longer to bond and may lead to a good description of “gum failure” (learn more here). If the temperature of the adhesive is too low, it may solidify prematurely and cause weak bonding. This is called a preset. Follow the manufacturer’s TDS to obtain the recommended application temperature range and make corresponding adjustments.
2. Keep the glue can full: Remember to keep the glue can full during use. When the adhesive level is too low; Hot spots and gel formation may occur, leading to carbonization. If you manually load them, it’s easy to forget to refill the flowerpot. Having an automatic filling system to replenish adhesive as needed and a liquid level control system to monitor adhesive levels will ensure that your tank remains full. This can supplement the antioxidants in the adhesive to combat carbonization.
3. Reduce the pot temperature when not in operation: Due to the continuous thermal stress on the hot melt tank, hose, and nozzle, they have a tendency to produce coke. Reduce the pot temperature when not in use to minimize any potential thermal degradation of the hot melt adhesive and equipment. This will reduce the chance of carbonization occurring.
When maintaining high-performance operation of the hot melt adhesive machine, you can take many measures to reduce downtime and improve system performance. Please remember that downtime equals production loss. 1) Apply hot melt adhesive at the correct temperature. Using the correct settings can avoid many troubles. You may also want to try using a metallocene […]
Material Overview PE, PP, PVC, PS, PC, POM, EP, ABS, PA, PMMA, etc. are collectively referred to as plastic materials, also known as polymer materials. They are a type of synthetic material with plasticity made from polymer compounds through different processing methods. Plastic materials have the advantages of lightweight, high strength, corrosion resistance, and good […]
hot melt adhesive pelletsWhat should I do if I get damp? During the rainy season in the south or improper storage in the warehouse, the hot melt adhesive particles may absorb moisture. When damp rubber particles are heated, they will produce a large number of bubbles, overflow, and decrease in adhesion. But not all damp […]
EVA eco-friendly hot melt adhesive is a thermoplastic material composed of EVA, tackifiers such as petroleum and rosin, as well as some bonding AIDS, and is formed in solid cylindrical rods or granular form. It can be melted and applied by using a hot melt gun, sprayer or other glue binding equipment, etc. Because it […]
