新闻中心
The performance and effect of the hot melt adhesive used for producing hand-held paper bags of different materials vary depending on the model used. Choose the right one< strong>When using Sunlife hot melt adhesive to stick the side and bottom of a hand-held paper bag, the material of the paper bag being stuck is different, so the bonding effect of the hot melt adhesive will also be different. In the daily production of hand-held paper bags, the most widely used materials are white cardboard, kraft paper, whiteboard paper, and copperplate paper.
1. Hot melt adhesive for white cardboard bags
2. Kraft paper bag hot melt adhesive
3. Whiteboard paper bag hot melt adhesive
4. Copperplate paper bag hot melt adhesive
Paper bag adhesive is a hot melt adhesive used for sticking paper. Suitable for paper of different materials or surfaces. The bonding performance of hot melt adhesive varies depending on the different issues of paper bonding. Before production, confirm whether the hot melt adhesive for hand-held paper bags is suitable for use.
Analysis of aging reasons of EVA hot melt adhesive during use? Many customers encounter a decrease in viscosity and insufficient bonding strength of EVA hot melt adhesive after prolonged use. It is usually considered that the product quality is poor. However, this is not the case. This phenomenon is likely caused by the aging of […]
EVA eco-friendly hot melt adhesive is a thermoplastic material composed of EVA, tackifiers such as petroleum and rosin, as well as some bonding AIDS, and is formed in solid cylindrical rods or granular form. It can be melted and applied by using a hot melt gun, sprayer or other glue binding equipment, etc. Because it […]
In book binding with copperplate paper as the inner page, due to the thin film covering the surface of copperplate paper, there is a high demand for the adhesive used. It is difficult for people to bind books and periodicals with white glue in order to make them more firmly attached to copperplate paper. After […]
What are the ways to change the demand for packaging hot melt adhesive? Decades ago, primary packaging was the main focus of manufacturers, shop owners, and consumers. In most cases, few people handle the goods before they enter the hands of shop owners and consumers. However, once the hypermarkets began to take effect, increasing the […]
