新闻中心
The key to choosing a wireless adhesive book that can be spread out without losing pages is to choose a flexible type that has good extensibility and does not become brittle at low temperaturesHot melt adhesive granulesAdd sufficient milling depth and adhesive amount. Many people think that the harder and more sticky it is, the stronger it is. In fact, a hard adhesive layer will form a hard shell on the spine of the book. When the book is flattened, the stress is concentrated at the folds, making it easier for the spine to crack and the pages to fall off.

| parameter | Scope of proposal for flat allocation | meaning |
|---|---|---|
| Elongation at break | The higher, the better, preferably high elongation grades | Determine whether the adhesive film can be repeatedly bent along with the spine of the book |
| low-temperature flexibility | Not brittle at 0-5 ℃ | Winter transportation and classroom storage without pages falling off |
| softening point | The temperature range of 80-90 ℃ is relatively balanced | Too high, too hard, too brittle, too low, easy to stick back in summer |
One is to control the milling depth at 0.8-1.2mm, so that enough fuzz is formed on the paper edge; The second is to adjust the amount of glue according to the format, usually 0.5-0.7g/book for 16 format brochures, and press and hold for 2-3 seconds. The flat adhesive granules for Sunlife hot melt adhesive are formulated according to the direction of high elongation. Guangzhou Sunlife Trading can send samples and test the adhesive according to your paper sample and format, and conduct a test first before measuring the quantity.
Flexible granules are more sensitive to moisture, and micro bubbles are easily generated inside the adhesive layer after moisture. When bent, they crack from the bubbles. Before arrival, check whether the particles are uniform and free of clumps. After opening, be sure to tie the inner bag tightly and place it in a cool place. It is recommended to use desiccants during the southern rainy season. In addition, if the inner pages of the same book are mixed with copperplate paper and writing paper, the adhesive should be selected and the amount of adhesive should be determined according to the most difficult to stick paper, otherwise the thin paper should be firm and the coated paper should be opened first.
Q1: Do I have to use PUR glue for flat bread?
not always. PUR has good flexibility, but the equipment and cost threshold are high; Generally, high elongation EVA flexible grades are sufficient for picture books and notebooks.
Q2: How to quickly test if it can be spread evenly?
Spread the finished product flat and press for 30 seconds, repeat 20 times, check for cracks on the spine and looseness on the inner pages.
Q3: Can increasing the amount of glue solve the problem of loose racks?
No. Excessive glue will only overflow and dirty the pages. If the flexibility is not enough, whether to crack or not, it is necessary to change the glue type first.
EVA hot melt adhesive material is a thermoplastic adhesive that is very different from ordinary cold glue. According to its characteristics, the following points must be grasped and paid attention to during use: 1、 Understand and master the various models and technical performance (parameters) of EVA hot melt adhesive. Different types of hot melt adhesives […]
Everything in the world has two sides. For environmentally friendly hot melt adhesive manufacturers involved in the adhesive industry, our accumulated industry and production experience deeply understand that hot melt adhesive particles, like anything else, not only have many unique advantages, but also inherent disadvantages. Undoubtedly, we want to understand the advantages of hot melt […]
First, give the conclusion:Hot melt adhesive granulesForming through four steps of “heating coating pressing cooling” Hot melt adhesive particles are solid particles at room temperature and cannot directly adhere to objects. It needs to be heated to 160-190 ℃ using a glue pot or granule gluing machine to melt into a liquid state, applied to […]
Hot melt adhesive materials vary greatly depending on their formula adjustments. So what should we pay attention to when choosing hot melt adhesive? This mainly needs to be judged based on specific needs. 1. Melting point of hot melt adhesive for books and periodicals The melting point is commonly referred to as the melting point […]