新闻中心
You will find hot melt adhesive everywhere in your daily life. From the furniture you sit on to the corrugated cardboard boxes containing mail at the local post office, it is not difficult to find items bonded with this popular adhesive.
Companies that work with wood, fabric and foam plastics, shoe manufacturers, bookbinders and plastic manufacturers almost exclusively use hot-melt adhesives to meet their bonding requirements. Construction workers and contractors will use hot melt adhesives to install decorations, laminate flooring, and even bond concrete blocks together in the new house. Hairstylists will use hot melt adhesive for hair extensions, while fashion designers will use it to decorate their clothing pieces.
Electricians use hot melt adhesive to seal circuit boards and secure and encapsulate wires. Automakers use this adhesive on their production lines for interior and seat assembly. Electrical manufacturers use hot melt adhesive for decoration and gasket applications.
The biggest consumer of hot melt adhesive is likely to be the packaging industry. From the adhesive strip on the envelope to anything that requires coating or printing, hot melt adhesive simplifies and simplifies the bonding process in the most cost-effective and clean way possible.
Hot melt adhesive adheres well to many substrates, including:
Direct answer: One kilogram of hot melt adhesive granules specifically designed for books and periodicals, estimated to be able to hold approximately 80-120 books in a common A4 booklet (about 150 pages, with a book back length of about 29.7 centimeters); There are more pocket books and thin books, up to 150 or more; Thick […]
Direct answer: The consumption of adhesive particles is relatively high, and 90% of the problem lies in four areas – excessive setting of adhesive amount, waste caused by improper temperature, equipment leakage, and mismatched selection of adhesive particles. After item by item investigation, most factories can reduce unit adhesive consumption by 15% -30% without sacrificing […]
First, correct a common misconception: corrugated cardboard boxes cannot be tightly sealed, and most of the time it is not a problem with the quality of the glue particles, but rather due to insufficient pressing time, moisture in the cardboard box, improper glue amount or temperature, or the cardboard box being covered with film or […]
Direct answer: The consumption of adhesive particles is relatively high, and 90% of the problem lies in four areas – excessive setting of adhesive amount, waste caused by improper temperature, equipment leakage, and mismatched selection of adhesive particles. After item by item investigation, most factories can reduce unit adhesive consumption by 15% -30% without sacrificing […]
