新闻中心
low temperatureHot melt adhesive granulesSuitable for materials that are sensitive to heat and prone to deformation, with a melting temperature of about 110-130 ℃, it can complete bonding at lower temperatures, avoiding substrate burns, shrinkage, or wrinkling.
Confirm the upper limit of substrate temperature resistance and select the one that matches the opening time and production efficiencyHot melt adhesive granulesFor those with high requirements for adhesive strength, priority should be given to Sunlife’s low-temperature and high adhesion series of hot melt adhesives. Guangzhou Sunlife Trading can provide specific model recommendations based on material samples.
Q: Is the low-temperature adhesive firm?Suitable substrates are fully sufficient, the key is to match the opening time and pressing timing.
Q: Can it be mixed with regular glue?It is not recommended to mix them, as different melting points can easily cause delamination.
Whether it’s a newly opened or taken over from someone else’s factory, as my first purchase of hot melt adhesive, it’s indeed not as simple as just “buying glue” as I feel in daily life. If the wrong hot melt adhesive is selected, it may lead to the inability to spray the adhesive, bonding failure, […]
The selection of hot melt adhesive in packaging composite scenarios should not only be based on whether it can stick or not. The substrate combination, adhesive application method, and subsequent flow conditions determine whether the solution is suitable for the actual production line. This article provides a judgment framework that is easy for procurement and […]
Trends in binding hot melt adhesives and polyolefin adhesives: In recent years, the binding industry has had to adapt to many changes, including increasing production line speed and adopting polyolefin (POE) adhesives. Which products can help you meet the demands brought about by these developments and why? Hot melt adhesive for faster binding line speed […]
Opening a new graphic and text fast printing store for adhesive business, you can start production with these 9 consumables: hot melt adhesive particles (back glue+side glue), cover cardboard, milling cutters, cleaning agent, silicone oil paper, binding fixtures, cutting blades, anti-static brushes, and waste paper for trial assembly. Below is a detailed explanation of the […]
